Attention should be paid to the decoration issues of fixed hotel furniture. When designing the material structure of fixed hotel furniture decoration panels in guest rooms, we can focus on the following aspects.
1) Appearance quality
Appearance quality first requires a flat furniture table, fine workmanship, delicate decoration, and clear and beautiful texture. For fixed furniture in guest rooms, the decorative panels usually use particleboard, medium-density fiberboard, blockboard, laminate, etc. as the base material, and use thin wood, wood veneer, and plywood as the covering material. Different base materials and cladding materials also have different material properties. Failure to pay attention to the properties of the materials and their correct use often results in the warping of the panels. It is recommended that the structural properties of the cladding materials on the back and front of the panel must be the same or similar. The moisture content of the base material is generally required to be 6~10%, and the materials selected should be from the same batch. In workshop processing, try to shorten the time of loading and pressing. Different material properties, different moisture content of covering materials, pay attention to different glue thicknesses, press time, and pressure.
2) Structural strength
Hotel guest room furniture is mostly fixed furniture, generally, structural plate type, using wood screws, hardware connectors, and adhesives as joint methods. When using materials, attention should be paid to different material properties. For example, particle boards and medium-density boards have poor nail-holding strength. They should not be used in areas that require frequent activities or strong nail-holding strength, such as door hinge screws and rail bottom rails. The screws are prone to loosening and making noise. Special attention should be paid to the hardware hanging parts on the bed screen and picture frame wall, or wood should be used instead for reinforcement. Currently, the wooden 45-degree upside-down structure is popular.
3) Material cost
Try to use low-cost materials as long as they meet the requirements of use. While using large surface materials, pay attention to the use of small pieces of the same kind of materials to improve the utilization rate of panels comprehensively. The furniture in guest rooms is generally large in quantity. Try to use computers to arrange the materials reasonably and comprehensively utilize large and small pieces of materials to reduce material costs. For different structures, pay attention to the comparison of material costs.
4) Efficient production
With the same material cost, which material is easy to process and which process can save process costs and improve efficiency, especially in end milling, boring, and engraving processes, which material is easy to process and cut, smooth and tidy?
5) Transportation and installation
Hotel floors are generally higher, and hotel furniture must have fixed furniture veneer panels that are light in weight and easy to transport. In particular, some one-piece bed backs and some extended desks cannot be transported by elevators. Freight elevators are generally dismantled during furniture installation. How to transport them safely requires special consideration in terms of material weight and structure.
6) Safety performance
Generally, hotels do not have clear regulations on the amount of free formaldehyde, but there are fire protection requirements for furniture. Fireproof boards, anti-scalding paint, flame-retardant fabrics, etc. can be used in certain parts with the permission of the hotel. High-end hotels even require the production of fixed furniture, and the wood of the veneer must be fire-resistant.
The above factors need to be comprehensively considered in practical applications. The functional requirements of hotel furniture have an interactive relationship with the hotel furniture company's reasonable material structure and workshop process arrangements. Focus hotel furniture customization manufacturers recommend that the guest room furniture produced should be as flexible as possible. The fixed furniture and decorative panels not only meet the requirements of the hotel but also can be produced efficiently and save costs. We use professional processing technology and processing equipment to make furniture that meets high-end hotels' people-oriented comfort requirements.
