Hotel furniture supporting hotel room furniture is a hotel project. In the design of hotel engineering projects, the coordination of indoor functions and environment must be directly considered. In addition, style requirements vary according to different grade requirements and standards. When purchasing, we should choose guest room furniture that is beautiful and made of high-quality materials. So, how to judge the quality of hotel guest room furniture?
1. Observe the advantages and disadvantages of wood: Open the cabinet doors and drawers of guest room furniture and observe whether the wood is dry, white, and dense; inferior wood or yellow heartwood and other secondary materials are not only yellow-brown, but also the wood is very soft.
2. Observe whether there are any defects in the wood: the main stress-bearing parts of the guest room furniture should be framed, and the load-bearing rods close to the ground between the connecting columns should be free of large knots, cracks, and cracks.
3. Observe the panel strength: You can press the panel strength of the hotel room furniture with your fingers to feel the firmness of the panel. The surface material should be fixed with a well-formed skeleton. If the skeleton is sparse, the surface will feel hollow and unreal when pressed, and the panel will vibrate violently. The drawer bottom can be pressed by hand to test the strength.
4. Skirts should be protected: Guest room furniture decorated with various facing materials should be equipped with protective skirts close to the ground, otherwise a layer of 3mm thick polyester board may be injured by toes. When purchasing, squat down, put the back of your hand on the ground, turn your hand to the inside and touch it. Whether to add horizontal strips.
5. Accurate size and correct shape: Check whether the drawers or door frames of hotel guest room furniture are tilted, whether the mortise position is distorted the eye holes are too large, or the mortises are not tight, etc.
6. Main size and structure requirements: The width of the support columns and partition cabinet bottom columns of modular guest room furniture should be no less than 45mm-50mm, and the thickness should be 20mm-22mm. The width of the horizontal bars around the cabinet should be 25mm-30mm and the thickness should be 20-22mm.
7. Identify shoddy work and materials: For example, some hotel room furniture uses medium-density lath and particle board as load-bearing components. Some hotel room furniture uses nails as support pins instead of baffles and pressure strips behind the vanity mirror, which is very unstable.
Check the dryness of wood in hotel room furniture by feel to determine the high and low moisture content of the wood. Please note that when the wood is not dried and has a high moisture content, indoor furniture is prone to deformation and deformation.
