It takes root and sprouts in the soil, and after the scorching sun and the beating of wind and rain, it eventually grows into a lush tree, which is selected as wood and processed into furniture. From small saplings to furniture, this is not the end of the tree's life, but a new beginning. Good furniture is like a family, bringing you comfort and warmth. In the same way, furniture also needs our care to accompany us for a long time.
The hot summer is actually a major test for our solid wood furniture. Light, temperature, humidity, etc., will pose a great threat to our furniture. Today, Zhou Bao is here to teach you how to protect our solid wood furniture in the sweltering heat!
1.light and humidity
Lighting: The weather is hot in summer, and the ultraviolet rays of the sun are very strong. If the solid wood furniture is kept in direct sunlight for a long time, the moisture contained in the wood will be slowly evaporated, and the lack of moisture will easily crack or deform due to excessive drying. Therefore, summer furniture It is best to avoid placing it in a place with frequent direct sunlight, and the room should also draw the curtains in time.
Humidity: The climate in summer is erratic and changes drastically, and the regional climate varies greatly. The inland is dry and hot, and the coast is humid and muggy. If you are in a hot inland, you should pay attention to increasing the indoor humidity. You can choose to raise fish and raise indoors. Flowers or green plants can not only beautify the environment, but also adjust the indoor air humidity; if you are in a humid coastal area, you should pay attention to dehumidification to prevent solid wood furniture from being damp and expand, and you can also use air conditioners to dehumidify.
2.Solid wood life, gold contains water
The base plate core of the decorative board decorative series is made of all eucalyptus wood species, which can be stably locked in 8-16% gold moisture content after processing, and the annual air moisture content in most regions of the country is also within this range, which can better adapt to different Regional climate change.
3.Large temperature difference
In summer, the temperature is high, not only we can't stand it, but even wooden furniture is also somewhat "unbearable". Too high or too low temperature will actually affect its service life, especially the location close to the heat source or the air-conditioning vent should be avoided as much as possible. Excessive temperature changes will lead to "damaged appearance" of furniture, and it is a problem that we should pay attention to relative to maintaining a "constant temperature" in the room.
4.Solid wood structure, stable and consistent
The base plate core of the decorative energy board decorative series is paved with a crisscross cross structure of whole eucalyptus rotary cut single piece, which significantly improves the internal stability of the board and has a stronger anti-deformation effect; at the same time, the fine shavings on the upper and lower surfaces of the board undergo high-energy polymerization reaction on the board. A stable protective layer is formed on the surface, which protects the core of the board and firmly locks the moisture inside the board.
Decorative panel veneer series, solid wood core, super flat, effectively solve the pain points such as surface carbonization, bulging, wave pattern and so on after the board is pressed, so that the finished furniture can show the best effect, continue the charm of solid wood core, and let life return to the original intention. Regardless of spring, autumn, winter or summer, we aim to protect your green and healthy home.
