Things to keep in mind when buying natural veneer:
1. Carefully check the light transmission performance of the veneer. Generally speaking, the better the light transmission performance of the veneer, the worse the quality.
2. Carefully check whether there are obvious damages, scratches or knife wounds on the surface of the veneer. Pay attention to the veneer with obvious damage, scratches or knife wounds, which are generally defective or substandard products.
3. Carefully check the grain and color of the veneer. The grain is clear, the holes are natural, and the veneer with smooth color is generally the preferred veneer.
4. Due to the complex process of natural veneer, the requirements for dyeing technology, related process equipment and on-site management are relatively high. Therefore, the inspection of the quality of natural veneer can not only be used as a reference from the market product model, but also have the opportunity to go to relevant manufacturers for further understanding. And consultation, to ensure product quality to achieve the effect of long-term stable and assured supply.
5. Pay attention to product production cycle inspection and service capabilities. Generally speaking, the production cycle of natural veneer is more than one month, and powerful manufacturers can have the ability to coordinate production and efficient services, and can shorten mature products and production cycles to Between 15 days and 20 days, and the delivery cycle can be controlled to about 3-10 days, thus providing you with a strong service guarantee.
6. Pay attention to the scale and strength of the manufacturer. The current timber resources are relatively tight, and the main materials of natural veneer are poplar, phoenix, and basswood. Natural veneer manufacturers need to have corresponding strengths to ensure smooth flow of raw materials and product stability. supply.
The difference between solid wood furniture, natural veneer furniture and sticker furniture.There are many types and parts of solid wood with fewer materials, and precious wood rarely uses solid wood. For example, solid wood dining chairs are more common, but generally imported beech is used for medium and high-end ones, maple, birch, and domestic beech are used for mid-range ones, and rubber wood is used for low-end ones. If someone tells you that he sells "imported black walnut solid wood dining chairs" for five or six hundred yuan each, then he must be cheating on you. That chair is mostly made of birch wood dyed into black walnut color, similar practices are very common in the furniture industry both at home and abroad. However, the original intention of cost saving and harmonious matching has been used to deceive the world, so we have to guard against it.
