The air is humid and warm, which is suitable for the growth and reproduction of various molds. The moisture protection of indoor hotel furniture has become a top priority. Someone has to ask, why has five-star furniture been used for more than ten years? Why does it only take more than ten years to use the furniture in my home? I want to tell you, in fact, new furniture is brought up!
Due to the different materials of hotel room furniture, the wet performance, treatment and maintenance methods are different, such as solid wood furniture, fabric furniture, leather furniture, etc. have different treatment methods.
1. Solid wood furniture for hotel room furniture
Moisture treatment: If the furniture of a solid wood hotel room is wet, if it is not serious, it should be ventilated and dried in a timely manner. If condensation or mold spots appear, stick absorbent paper on the surface of the room furniture to prevent moisture, and use mild detergent to remove mold spots Dehumidify. Install waterproof pads under the legs of the hotel room furniture that easily absorb water, and keep a good ventilation distance near the outer wall and the wall of the bathroom.
Maintenance method: In the case of solid wood hotel room furniture without condensation or mildew, a moisture-proof bag such as a desiccant can be placed inside the furniture for moisture absorption treatment. After wiping the outside with a dry towel, wipe a layer of walnut oil to dampen it.
2. Panel furniture for hotel room furniture
If the panel hotel room furniture is not properly edge-sealed, it will easily expand and deform. Plate-type furniture must be treated with edge-sealing to prevent moisture.
Moisture treatment: Residents on lower floors should place moisture-proof mats under the furniture of the board hotel rooms. After getting wet, put moisture-proof bag in time to absorb moisture.
Maintenance method: Pay attention to keep the joints of hotel room furniture clean to prevent dust and impurities from absorbing and expanding and causing cracks. In areas such as seams that are prone to absorb water, close measures must be taken.
